This industrial O-ring, constructed from robust Viton and housed in a carbon steel body, provides superior sealing performance. Engineered for reliability in extreme conditions.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.570" |
| Outside Diameter | 10.035" |
| Cross Section | 0.154" |
Built to exacting engineering tolerances, this Viton O-ring features an inside diameter of 8.570 inches, an outside diameter of 10.035 inches, and a precise cross-section of 0.154 inches. The Viton material offers exceptional resistance to heat, chemicals, and fuels, making it ideal for high-temperature and aggressive media environments. The carbon steel housing ensures dimensional stability and robust mechanical support, preventing extrusion under high pressure. This combination guarantees a reliable seal in critical industrial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from burrs or damage. 2. Carefully place the O-ring into the designated groove, avoiding stretching or twisting. 3. Assemble mating components, ensuring even pressure distribution over the O-ring surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing excessive O-ring compression and premature failure. | Adhere to specified torque values during assembly to prevent over-compression. |
| Using an O-ring of incorrect size or material for the application. | Verify O-ring dimensions and material compatibility with the fluid and operating conditions prior to installation. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Hydraulic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||