This industrial O-ring, crafted from premium Viton (Polycarbonate), delivers exceptional sealing integrity. Its precise dimensions ensure a secure fit in critical applications requiring resistance to harsh chemicals and extreme temperatures.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.470" |
| Outside Diameter | 5.900" |
| Cross Section | 0.070" |
Engineered for reliability and performance, this Viton O-ring boasts an inside diameter of 8.470 inches, an outside diameter of 5.900 inches, and a precise cross-section of 0.070 inches. The inherent properties of Viton, a fluoroelastomer, provide outstanding resistance to a wide array of aggressive chemicals, fuels, oils, and high temperatures up to 400°F (204°C). This makes it ideal for applications in the automotive, aerospace, chemical processing, and oil and gas industries where fluid containment and leakage prevention are paramount. The material's low compression set ensures long-term sealing effectiveness even under sustained pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of debris or sharp edges. 2. Carefully lubricate the O-ring and groove with a compatible lubricant if recommended for the application. 3. Install the O-ring into the groove, taking care to avoid stretching or twisting it.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade Viton. | Consult the chemical compatibility chart for Viton and select a lubricant specifically approved for use with fluoroelastomers. |
| Forcing or twisting the O-ring during installation, leading to damage. | Gently roll or slide the O-ring into the groove. Ensure it sits flush without any visible distortion. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical processing equipment seals, Automotive fuel systems, Aerospace hydraulic systems, Oil and gas exploration components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||