This industrial Viton O-ring, constructed with a brass core, provides exceptional sealing in demanding environments. Its robust design ensures longevity and reliability across a wide range of chemical exposures and temperatures.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.434" |
| Outside Diameter | 9.534" |
| Cross Section | 0.254" |
Engineered for reliability and performance, this Viton O-ring boasts precise dimensions of 8.434" inside diameter, 9.534" outside diameter, and a 0.254" cross-section, housed within a durable brass material. Viton's inherent resistance to aggressive chemicals, fuels, oils, and extreme temperatures (up to 400°F / 204°C) makes this seal ideal for aerospace, automotive, and chemical processing industries where seal integrity is paramount. The brass component enhances structural integrity and conductivity where required by the application.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean sealing surfaces thoroughly to remove any debris or old sealant. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate insertion and prevent damage. 3. Carefully install the O-ring into its designated groove, ensuring it is seated evenly and without twists.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to tearing or stretching during installation. | Always use a compatible lubricant to ease installation and protect the O-ring material. |
| Using excessive force or twisting the O-ring during installation, causing irreparable damage. | Handle the O-ring with care and ensure it is properly aligned before applying gentle, even pressure. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||