Engineered for extreme conditions, this Viton O-ring provides superior sealing integrity. Its robust construction resists aggressive chemicals and high temperatures, ensuring reliable performance in critical industrial applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.383" |
| Outside Diameter | 9.452" |
| Cross Section | 0.194" |
A high-performance industrial component, this Viton O-ring is precision manufactured with an Inside Diameter of 8.383 inches, an Outside Diameter of 9.452 inches, and a Cross Section of 0.194 inches. Constructed from Viton (FKM), a fluoroelastomer renowned for its exceptional resistance to a broad spectrum of chemicals, oils, fuels, and solvents, it also exhibits excellent thermal stability, capable of withstanding operating temperatures from -20°F to over 400°F. This makes it ideal for demanding sealing applications in aerospace, automotive, chemical processing, and oil and gas industries where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and O-ring are clean and free from debris. 2. Carefully lubricate the O-ring with a compatible lubricant if required by the application. 3. Gently install the O-ring into its designated groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to friction and potential damage during installation. | Always use a compatible lubricant to reduce friction and protect the O-ring during installation, especially in tight grooves. |
| Using excessive force or sharp tools, which can nick or cut the O-ring. | Employ hand pressure for installation and use only designated, non-marring tools if absolutely necessary. |
| Selecting an O-ring material not resistant to the specific media or temperature of the application. | Verify the chemical and temperature compatibility of Viton (FKM) with your operating environment before selection. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: High-temperature hydraulic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||