Engineered for superior sealing in critical industrial applications. This Viton O-ring offers exceptional resistance to heat, chemicals, and aggressive media, ensuring reliable performance and extended service life.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.578" |
| Outside Diameter | 4.993" |
| Cross Section | 0.108" |
A high-performance industrial component, this Viton O-ring is designed to excel in challenging environments. With an Inside Diameter (ID) of 8.578 inches, an Outside Diameter (OD) of 4.993 inches, and a precise Cross Section (CS) of 0.108 inches, it provides a robust seal. Formulated from fluoroelastomer (Viton), this material exhibits outstanding resilience to a broad spectrum of chemicals, including fuels, oils, and solvents, as well as high temperatures up to 400°F (204°C). Its inherent low compression set ensures long-term sealing integrity under constant pressure, making it suitable for static and dynamic sealing applications across the aerospace, automotive, chemical processing, and oil and gas industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned for the specified O-ring. 2. Lightly lubricate the O-ring with a compatible lubricant, such as silicone grease, to facilitate installation and prevent damage. 3. Carefully place the O-ring into the groove, ensuring it is seated evenly without twisting or stretching beyond its elastic limit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or sharp tools during installation, leading to cuts or nicks in the O-ring. | Employ gentle, consistent pressure and use only non-marring tools for O-ring placement. Ensure the O-ring is properly lubricated. |
| Incorrect O-ring size selection for the groove, resulting in either leakage or premature failure due to over-compression. | Verify that the O-ring's dimensions (ID, OD, and CS) precisely match the groove specifications. Consult detailed sizing charts and application guidelines. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Aerospace fuel systems, Automotive engine seals, Chemical processing equipment, Oil and gas exploration machinery, High-temperature hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||