This industrial-grade Viton O-ring provides superior sealing performance in extreme environments. Its robust composition ensures longevity and reliability in critical applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 8.024" |
| Outside Diameter | 10.927" |
| Cross Section | 0.188" |
Manufactured under strict quality controls, this Viton O-ring boasts a precise Inside Diameter of 8.024 inches, an Outside Diameter of 10.927 inches, and a Cross Section of 0.188 inches. Composed of fluoroelastomer (Viton), it exhibits exceptional resistance to a wide range of chemicals, oils, fuels, and high temperatures up to 400°F (204°C). This makes it ideal for sealing in automotive, aerospace, chemical processing, and oil & gas industries where durability and chemical inertness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring, avoiding excessive stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incompatible lubricant that degrades the Viton. | Consult the material compatibility chart and use only recommended lubricants such as silicone grease or PTFE-based lubricants. |
| Over-stretching the O-ring during installation, leading to premature failure. | Gently ease the O-ring into the groove, utilizing its inherent elasticity without forcing it beyond its elastic limit. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: High-temperature hydraulic systems, Chemical transfer lines, Automotive fuel and emission control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||