Engineered for exceptional chemical and thermal resistance, this Viton O-ring with a brass fitting ensures reliable sealing in aggressive industrial applications. Its precise dimensions guarantee a secure fit and long-lasting performance.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.700" |
| Outside Diameter | 9.960" |
| Cross Section | 0.249" |
A high-performance industrial component, this Viton O-ring features a precise Inside Diameter of 9.700 inches, an Outside Diameter of 9.960 inches, and a Cross Section of 0.249 inches. The Viton (FKM) material offers outstanding resistance to a wide range of chemicals, oils, fuels, and high temperatures, making it ideal for demanding environments where conventional elastomers would degrade. The integrated brass fitting provides robust mechanical support and ensures compatibility with specific fluid pathways or manifold designs. This combination delivers superior sealing integrity and longevity in critical fluid power and chemical processing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove and sealing surfaces are clean and free from debris or damage. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate installation and prevent pinching. 3. Carefully install the O-ring into its designated groove, ensuring it is properly seated without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle pressure and use a lubricant to ease the O-ring into its groove. Avoid using sharp tools that can nick or cut the elastomer. |
| Installing the O-ring in a twisted or improperly seated position. | Visually inspect the O-ring after installation to confirm it is flat and fully seated within the groove, without any twists or gaps. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Hydraulic and Pneumatic Systems, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||