This industrial Viton O-ring provides superior sealing capabilities in extreme environments. Engineered for high temperature and aggressive chemical resistance, ensuring reliable performance and extended service life.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.935" |
| Outside Diameter | 8.439" |
| Cross Section | 0.188" |
A high-performance industrial component, this Viton O-ring features precise dimensions of 7.935" inside diameter, 8.439" outside diameter, and a 0.188" cross-section. The premium Fluoroelastomer (Viton®) material offers exceptional resistance to a broad spectrum of chemicals, fuels, oils, and solvents, while maintaining its sealing integrity across a wide temperature range (-20°F to +400°F). Its inherent resilience and low compression set make it ideal for static and dynamic sealing applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from burrs. 2. Lubricate the O-ring and groove lightly with a compatible lubricant (e.g., silicone grease). 3. Carefully install the O-ring into the groove, avoiding excessive stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incompatible lubricant that degrades the Viton material. | Always consult a compatibility chart to select a lubricant approved for Viton and the specific application environment. |
| Over-stretching or twisting the O-ring during installation, leading to premature failure. | Install the O-ring gently, ensuring it sits squarely within the groove without deformation. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Automotive fuel systems, Chemical processing equipment, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||