This robust Viton O-ring, encased in durable 304 stainless steel, offers exceptional chemical and temperature resistance. Engineered for reliable sealing in aggressive industrial environments, ensuring integrity and longevity.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 8.471" |
| Outside Diameter | 6.968" |
| Cross Section | 0.090" |
Trusted by engineers across multiple sectors, this industrial O-ring features a precise Inside Diameter of 8.471 inches and an Outside Diameter of 6.968 inches, with a critical Cross Section of 0.090 inches. The high-performance Viton elastomer provides superior resistance to a wide range of chemicals, fuels, and extreme temperatures (-20°F to +400°F), while the 304 stainless steel housing offers excellent corrosion resistance and structural integrity. This combination makes it ideal for demanding applications in chemical processing, oil and gas, automotive, and aerospace industries where seal failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Carefully position the O-ring into its designated groove, ensuring it is not twisted. 3. Apply a light, compatible lubricant if necessary to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, leading to O-ring extrusion or compression set. | Follow specified torque values for fastener engagement. Ensure adequate clearance to prevent excessive compression. |
| Using incompatible lubricants or cleaning agents that degrade the Viton material. | Consult material compatibility charts for Viton and use only approved lubricants and cleaning agents. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Oil & Gas Exploration and Production, High-Temperature Fluid Handling Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||