Engineered for exceptional performance, this industrial Viton O-ring provides robust sealing in challenging environments. Its advanced material composition ensures reliability across a broad temperature and chemical spectrum.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.796" |
| Outside Diameter | 1.671" |
| Cross Section | 0.074" |
A high-performance industrial component, this Viton O-ring is meticulously manufactured to meet rigorous sealing demands. With an inside diameter of 4.796 inches, an outside diameter of 1.671 inches, and a precise 0.074-inch cross-section, it offers superior resilience and longevity. Viton's inherent properties, including excellent resistance to high temperatures, aggressive chemicals, oils, and fuels, make this O-ring ideal for critical sealing applications where failure is not an option. Its dimensional stability ensures a consistent and reliable seal under fluctuating operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both sealing surfaces and the O-ring groove to remove any debris or contaminants. 2. Lightly lubricate the O-ring and the sealing surfaces with a compatible lubricant to facilitate installation and prevent damage. 3. Carefully install the O-ring into the groove, ensuring it is properly seated without stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply controlled pressure and use appropriate tools for installation. Lubrication is key to reducing friction. |
| Incorrect lubrication, causing material degradation or poor sealing. | Always use a lubricant compatible with the O-ring material (Viton) and the operational environment. |
| Installing the O-ring with a twist or pinch, compromising its sealing integrity. | Ensure the O-ring is laid flat and evenly within the groove, avoiding any deformation. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||