This industrial-grade Viton O-ring offers exceptional sealing integrity in high-temperature and chemically aggressive environments. Its robust construction ensures reliable performance and extended service life in critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.250" |
| Outside Diameter | 7.669" |
| Cross Section | 0.139" |
Specified by design engineers worldwide, this Viton O-ring (9.250" ID x 7.669" OD x 0.139" CS) is engineered for superior performance. Viton (FKM) material provides outstanding resistance to a broad spectrum of chemicals, oils, fuels, and extreme temperatures ranging from -20°F to +400°F (-29°C to +204°C). Its low compression set guarantees long-term sealing efficacy, preventing leaks and maintaining system integrity under demanding operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and O-ring are clean and free from debris or lubricant contamination. 2. Carefully stretch or place the O-ring into the groove, avoiding any twisting or excessive stretching beyond its elastic limit. 3. Verify proper seating and that the O-ring is not pinched or damaged before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or sharp tools during installation, leading to nicks or cuts. | Employ proper installation techniques, using rounded tools or gentle hand manipulation to avoid damaging the O-ring's surface. |
| Incorrect O-ring size selection, resulting in either a loose fit (leakage) or an overtightened seal (premature wear). | Always confirm the O-ring's inside diameter, outside diameter, and cross-section match the groove dimensions precisely as specified in the design. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Automotive fuel systems, Aerospace hydraulic systems, Chemical processing equipment, High-temperature industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||