This industrial Viton O-ring, crafted from premium Titanium Grade 5, provides exceptional sealing performance. Its precise dimensions ensure a secure fit in critical applications requiring robust chemical and thermal resilience.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 7.544" |
| Outside Diameter | 7.944" |
| Cross Section | 0.081" |
Manufactured under strict quality controls, this industrial O-ring boasts an Inside Diameter of 7.544", an Outside Diameter of 7.944", and a Cross Section of 0.081". The Viton material, renowned for its excellent resistance to a broad spectrum of chemicals, fuels, and high temperatures (up to 400°F/204°C), is further enhanced by its compatibility with Titanium Grade 5's inherent strength and corrosion resistance. This combination makes it ideal for extreme environments in aerospace, automotive, and chemical processing industries where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools to prevent nicks or cuts. 3. Seat the O-ring fully within its groove, ensuring no twisting or over-stretching occurs.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure and use appropriate lubrication to facilitate installation without stressing the O-ring. |
| Installing in a dirty or contaminated groove, compromising seal integrity. | Thoroughly clean and inspect the sealing groove for any foreign particles or damage before commencing installation. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, Automotive fuel injection systems, Chemical processing equipment seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||