This industrial Viton O-ring, featuring a brass fitting, provides exceptional sealing performance. Engineered for demanding applications, it offers superior chemical and temperature resistance for long-term reliability.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.689" |
| Outside Diameter | 8.894" |
| Cross Section | 0.137" |
Built to exacting engineering tolerances, this industrial O-ring boasts an Inside Diameter of 9.689 inches and an Outside Diameter of 8.894 inches, with a precise Cross Section of 0.137 inches. The Viton material offers outstanding resistance to a wide range of chemicals, fuels, oils, and extreme temperatures (-20°F to +400°F), making it ideal for high-pressure systems and aggressive media. The integrated brass fitting ensures secure and robust integration within your assembly, preventing leaks and maintaining seal integrity under severe operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully position the O-ring onto the designated groove or shaft, avoiding stretching. 3. Apply a thin layer of compatible lubricant if recommended for the specific application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fittings, which can compress the O-ring beyond its elastic limit. | Tighten fittings to the manufacturer's recommended torque specifications to prevent O-ring extrusion or damage. |
| Using incompatible lubricants that degrade the Viton material. | Always consult the material compatibility chart for Viton and select a lubricant specifically approved for its use. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||