This industrial Viton O-ring, constructed with a 316 stainless steel housing, provides exceptional sealing in aggressive chemical and high-temperature applications. Engineered for reliability and durability.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 7.272" |
| Outside Diameter | 6.958" |
| Cross Section | 0.170" |
Precision-manufactured to tight tolerances, this industrial O-ring features an inside diameter of 7.272 inches, an outside diameter of 6.958 inches, and a cross-section of 0.170 inches. The Viton elastomer offers superior resistance to a broad range of chemicals, fuels, and oils, while maintaining excellent mechanical properties across a wide temperature spectrum. The integrated 316 stainless steel housing provides enhanced structural integrity and corrosion resistance, making it suitable for demanding industrial environments where standard O-rings may fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from debris. 2. Carefully position the O-ring within the groove, avoiding any stretching or twisting. 3. Apply a thin, compatible lubricant if necessary to facilitate seating and prevent damage during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing excessive compression and premature failure of the O-ring. | Adhere to specified torque values for all fasteners to prevent over-compression and ensure proper sealing. |
| Using incompatible lubricants or cleaning agents that degrade the Viton material. | Consult the material compatibility chart and use only lubricants and cleaning agents specifically approved for Viton and the operating environment. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical processing equipment, Petroleum and gas industry seals, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||