This industrial Viton O-ring offers superior resistance to extreme temperatures and aggressive media. Engineered for reliability in critical sealing applications, ensuring long-term performance and leak prevention.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.140" |
| Outside Diameter | 0.864" |
| Cross Section | 0.194" |
Built to exacting engineering tolerances, this Viton O-ring boasts an Inside Diameter of 7.140 inches, an Outside Diameter of 0.864 inches, and a Cross Section of 0.194 inches. Fabricated from high-grade Viton (FKM), it exhibits exceptional resilience to heat, chemicals, fuels, and oils, making it suitable for harsh operating environments. The precise dimensions ensure a secure and leak-proof seal in demanding industrial settings, maintaining integrity under pressure and extreme thermal cycling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and absence of damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring, ensuring it is seated evenly without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply only the necessary force for seating. If resistance is significant, re-check lubrication and groove condition. |
| Incorrect O-ring size for the groove, resulting in poor sealing or extrusion. | Verify that the O-ring's dimensions (ID, OD, CS) precisely match the specified groove dimensions for the application. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Aerospace fluid handling systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||