This industrial O-ring, constructed from Viton and housed in a carbon steel casing, offers exceptional sealing performance. Its robust design ensures reliability in demanding applications requiring resistance to harsh chemicals and extreme temperatures.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 2.679" |
| Outside Diameter | 1.043" |
| Cross Section | 0.090" |
Precision-manufactured to tight tolerances, this Viton O-ring features an inside diameter of 2.679 inches, an outside diameter of 1.043 inches, and a cross-section of 0.090 inches. The Viton material provides excellent resistance to a wide range of chemicals, oils, fuels, and high temperatures, while the carbon steel housing offers mechanical strength and support. This combination makes it ideal for static and dynamic sealing applications in petrochemical, automotive, and industrial machinery where durability and chemical inertness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and within specified dimensional tolerances. 2. Lightly lubricate the O-ring and groove with a compatible lubricant if recommended for the specific application. 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting. Ensure it sits flush and without pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Install the O-ring without excessive tension, ensuring it fits snugly within the groove without distortion. |
| Using an incompatible lubricant that degrades the Viton material. | Consult the O-ring manufacturer's compatibility chart or product data sheet for approved lubricants. |
| Installing the O-ring into a damaged or contaminated groove. | Thoroughly inspect and clean the groove before installation to prevent leaks and premature failure. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Petrochemical processing equipment, Automotive fuel systems, Hydraulic and pneumatic cylinders, Chemical processing pumps and valves, High-temperature industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||