This industrial O-ring, crafted from robust Viton, offers exceptional sealing capabilities. Engineered for demanding environments, it ensures reliable performance under extreme temperatures and harsh chemical exposure.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.409" |
| Outside Diameter | 3.861" |
| Cross Section | 0.244" |
Engineered for reliability and performance, this industrial O-ring features a precise Inside Diameter (ID) of 9.409 inches, an Outside Diameter (OD) of 3.861 inches, and a Cross Section (CS) of 0.244 inches. Constructed from Viton (Fluoroelastomer), it exhibits superior resistance to high temperatures (up to 400°F/204°C), aggressive chemicals, fuels, oils, and solvents, making it ideal for critical sealing applications in aerospace, automotive, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or debris. 2. Lightly lubricate the O-ring with a compatible lubricant (e.g., silicone grease or Viton-compatible oil). 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, and verify it is seated properly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive stretching to prevent premature failure and loss of sealing integrity. |
| Using an incompatible lubricant. | Always use a lubricant that is chemically compatible with Viton and the application's media to avoid material degradation. |
| Incorrect O-ring size for the groove. | Verify that the O-ring's dimensions (ID, OD, CS) precisely match the groove specifications to ensure proper compression and sealing. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems, High-temperature industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||