This industrial Viton O-ring provides superior sealing in extreme environments. Its robust construction ensures reliable performance in high-temperature and chemically aggressive applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.780" |
| Outside Diameter | 5.762" |
| Cross Section | 0.252" |
Precision-manufactured to tight tolerances, this Viton O-ring boasts an Inside Diameter of 6.780 inches, an Outside Diameter of 5.762 inches, and a Cross Section of 0.252 inches. Fabricated from high-performance Viton (FKM), it exhibits exceptional resistance to a wide array of chemicals, fuels, oils, and solvents, alongside excellent thermal stability up to 200°C (392°F). This makes it ideal for critical sealing functions in automotive, aerospace, chemical processing, and oil & gas industries where durability and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the shaft or into the groove, avoiding excessive force. 3. Verify proper seating and compression of the O-ring within the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, causing excessive stretching or cutting. | Use appropriate tools and techniques to ensure the O-ring is seated without over-stressing the material. |
| Using an incompatible lubricant or failing to lubricate when necessary. | Consult material compatibility charts and use only approved lubricants for Viton. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||