Engineered for extreme environments, this industrial Viton O-ring, reinforced with Nylon, provides exceptional sealing integrity. Its robust construction ensures reliability in high-pressure and chemically aggressive applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 6.580" |
| Outside Diameter | 10.564" |
| Cross Section | 0.169" |
Trusted by engineers across multiple sectors, this industrial-grade O-ring is precision-manufactured from Viton, a high-performance fluoroelastomer known for its outstanding resistance to a wide range of chemicals, fuels, oils, and extreme temperatures. The integrated Nylon reinforcement enhances its structural integrity and dimensional stability under stress. With an Inside Diameter (ID) of 6.580 inches, an Outside Diameter (OD) of 10.564 inches, and a Cross Section (CS) of 0.169 inches, this O-ring is designed for critical sealing duties where failure is not an option. Its low compression set ensures long-term sealing performance in demanding hydraulic, pneumatic, and fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris or damage. 2. Lightly lubricate the O-ring and the groove with a compatible lubricant. 3. Carefully install the O-ring into its designated groove, avoiding any stretching or twisting. 4. Verify proper seating and compression of the O-ring before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or distortion. | Apply gentle, consistent pressure. Use appropriate tools if necessary, ensuring they do not nick or cut the O-ring. |
| Incorrect O-ring size selection, causing leakage or premature failure. | Always verify the required O-ring dimensions (ID, OD, CS) against the groove specifications and the component requirements before installation. |
| Failure to lubricate the O-ring and groove, leading to installation difficulties and potential damage. | Use a lubricant compatible with the O-ring material and the application media. Apply a thin, even coat. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: High-temperature hydraulic systems, Chemical processing equipment, Automotive fuel and oil systems, Aerospace fluid containment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||