Engineered for demanding industrial environments, this Viton O-ring provides exceptional sealing performance. Its robust construction ensures reliability across a wide temperature range.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.333" |
| Outside Diameter | 4.231" |
| Cross Section | 0.164" |
A proven choice for industrial professionals, this Viton O-ring is manufactured from a premium fluoroelastomer (FKM) compound, renowned for its superior resistance to aggressive chemicals, fuels, oils, and extreme temperatures. The precise dimensions – an inside diameter of 6.333 inches, an outside diameter of 4.231 inches, and a cross-section of 0.164 inches – are critical for achieving a leak-proof seal in high-pressure and corrosive fluid systems. This O-ring is ideally suited for applications in the chemical processing, automotive, aerospace, and oil and gas industries where material integrity and long-term performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the fitting or component, avoiding any sharp edges or excessive force that could cause nicks or cuts. 3. Gently seat the O-ring into its designated groove, ensuring it is not twisted or pinched during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to tearing during installation. | Always lubricate the O-ring and the groove with a compatible, non-hardening lubricant before installation. |
| Using excessive force or sharp tools during installation, causing damage to the O-ring. | Handle the O-ring with care and use appropriate, rounded installation tools to avoid nicks, cuts, or stretching. |
| Twisting or pinching the O-ring in the groove, compromising the seal. | Ensure the O-ring is properly seated and lies flat within the groove without any twists or folds. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems, Oil and Gas Exploration Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||