This industrial Viton O-ring delivers superior sealing performance in critical applications. Its exceptional resistance to harsh chemicals, high temperatures, and extreme pressures ensures reliable operation and extended service life.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 7.092" |
| Outside Diameter | 9.604" |
| Cross Section | 0.084" |
Designed for demanding industrial environments, this Viton O-ring provides robust sealing capabilities within a temperature range of -20°F to +400°F (-29°C to +204°C). The compound's inherent chemical inertness makes it ideal for use with fuels, oils, solvents, and many acids. With an Inside Diameter of 7.092 inches, an Outside Diameter of 9.604 inches, and a Cross Section of 0.084 inches, this seal offers a precise fit for groove dimensions, preventing leakage under significant pressure fluctuations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Lightly lubricate the O-ring and groove with a compatible lubricant (e.g., silicone grease). 3. Carefully install the O-ring, avoiding stretching or twisting, to ensure proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive tension; it should fit snugly but not be deformed. |
| Using incompatible lubricants that degrade the Viton material. | Consult the O-ring manufacturer's compatibility chart for recommended lubricants. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Aerospace Fluid Systems, Automotive Fuel and Oil Handling, Chemical Processing Equipment, High-Temperature Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||