This industrial Viton O-ring provides exceptional sealing performance in extreme environments. Engineered for durability, it ensures reliable containment of aggressive fluids and gases across a wide temperature range.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 6.295" |
| Outside Diameter | 0.995" |
| Cross Section | 0.171" |
A high-performance industrial component, this Viton O-ring is precisely manufactured with an inside diameter of 6.295 inches, an outside diameter of 0.995 inches, and a cross-section of 0.171 inches. Constructed from Viton (FKM), it offers outstanding resistance to a broad spectrum of chemicals, fuels, oils, and high temperatures up to 400°F (200°C). Its robust material properties make it ideal for critical sealing applications where standard elastomers would degrade, ensuring long-term reliability and preventing leaks in demanding industrial machinery and systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris or damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant, if recommended for the specific application and fluid. 3. Carefully install the O-ring into the groove, avoiding excessive stretching or twisting, ensuring it sits flush and uniformly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or deformation. | Apply gentle pressure and use appropriate tooling to guide the O-ring into the groove, ensuring it's seated correctly without stretching or pinching. |
| Incorrect O-ring size selection, resulting in poor sealing or premature failure. | Verify the groove dimensions and O-ring specifications carefully before selection to ensure a proper fit and reliable seal. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical Processing Equipment, Aerospace and Automotive Fuel Systems, High-Temperature Fluid Handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||