This industrial Viton O-ring, manufactured with a 316 stainless steel housing, provides exceptional sealing performance in harsh environments. Its robust construction ensures longevity and reliability in critical applications.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.249" |
| Outside Diameter | 8.229" |
| Cross Section | 0.275" |
Trusted by engineers across multiple sectors, this Viton O-ring features an inside diameter of 6.249 inches, an outside diameter of 8.229 inches, and a 0.275-inch cross-section. The Viton elastomer offers outstanding resistance to a broad spectrum of chemicals, fuels, and extreme temperatures (up to 400°F/204°C), while the 316 stainless steel housing provides superior corrosion resistance and structural integrity in aggressive media and high-pressure systems. Ideal for aerospace, automotive, chemical processing, and oil & gas industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free from debris. 2. Carefully inspect the O-ring for any damage or defects. 3. Lubricate lightly with a compatible lubricant before installation to prevent tearing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation. | Apply steady, even pressure. If resistance is met, re-inspect the groove and O-ring for alignment or damage. |
| Installing without proper lubrication. | Use a small amount of a compatible lubricant (e.g., silicone grease, PTFE-based lubricant) to ease installation and prevent damage to the O-ring. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||