This industrial O-ring, crafted from Viton and featuring a brass construction, offers exceptional chemical and thermal resistance. Engineered for precise sealing in high-pressure environments, it ensures reliable performance.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 4.310" |
| Outside Diameter | 7.591" |
| Cross Section | 0.087" |
Manufactured under strict quality controls, this Viton O-ring boasts an inside diameter of 4.310 inches, an outside diameter of 7.591 inches, and a precise 0.087-inch cross-section. The Viton material provides excellent resistance to a wide range of chemicals, fuels, oils, and extreme temperatures (-20°F to 400°F), making it ideal for hydraulic systems, automotive applications, and chemical processing equipment where durability and sealing integrity are paramount. The brass component offers additional corrosion resistance in specific media.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, free of debris, and properly machined. 2. Lubricate the O-ring and groove lightly with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant or no lubricant at all. | Always use a lubricant compatible with Viton and the application media. Proper lubrication prevents tearing and aids installation. |
| Stretching or twisting the O-ring during installation. | Install the O-ring gently, ensuring it sits flat within the groove without deformation. Avoid excessive force or stretching. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: High-temperature fluid sealing, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||