Engineered for extreme environments, this industrial Viton O-ring ensures superior sealing integrity. Its robust construction and material properties make it ideal for critical applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 7.338" |
| Outside Diameter | 3.564" |
| Cross Section | 0.225" |
Purpose-built for heavy-duty applications, this industrial Viton O-ring is specified with an Inside Diameter (ID) of 7.338 inches and an Outside Diameter (OD) of 3.564 inches, featuring a cross-section of 0.225 inches. Constructed from Viton (FKM), it offers exceptional resistance to a wide range of aggressive chemicals, fuels, oils, and extreme temperatures, operating effectively from -20°C to +200°C. This makes it the preferred choice for demanding sectors such as aerospace, automotive, chemical processing, and oil and gas exploration where seal failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Lubricate the O-ring with a compatible lubricant to facilitate installation and prevent damage. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or tears in the O-ring. | Apply gentle, even pressure and use appropriate tools if necessary to avoid damaging the O-ring. |
| Incorrect lubrication, using incompatible lubricants that degrade the Viton material. | Always consult the material compatibility chart for Viton and use only approved lubricants. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic systems, Chemical transfer lines, High-temperature engine components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||