Engineered for extreme environments, this Viton O-ring, constructed with Aluminum 6061, offers superior chemical and temperature resistance for reliable, leak-free performance in critical industrial systems.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 5.846" |
| Outside Diameter | 7.954" |
| Cross Section | 0.146" |
Purpose-built for heavy-duty applications, this Viton O-ring boasts an Inside Diameter of 5.846 inches, an Outside Diameter of 7.954 inches, and a Cross Section of 0.146 inches. The Aluminum 6061 housing provides excellent structural integrity and corrosion resistance, making it ideal for environments exposed to aggressive chemicals, high temperatures (up to 200°C/392°F), and significant pressure. Its robust design ensures long service life and maintains seal integrity under demanding operational conditions in hydraulic, pneumatic, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, dry, and free from burrs or debris. 2. Carefully install the O-ring into the groove, avoiding stretching or twisting beyond its elastic limit. 3. Apply a thin layer of compatible lubricant if necessary for easier installation and to prevent premature wear.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation | Install the O-ring without excessive stretching. If necessary, use a lubricant and ensure the O-ring is properly seated before tightening. |
| Installing into a dirty or damaged groove | Thoroughly clean the groove and inspect for any sharp edges, burrs, or contamination that could compromise the seal or damage the O-ring. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Hydraulic Systems, Chemical Processing Equipment, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||