This industrial-grade Viton O-ring provides superior sealing performance in harsh environments. Engineered for resilience, its chemical and temperature resistance ensures reliability in critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 5.771" |
| Outside Diameter | 0.917" |
| Cross Section | 0.130" |
Trusted by engineers across multiple sectors, this Viton O-ring (5.771" Inside Diameter, 0.917" Outside Diameter, 0.130" Cross Section) offers exceptional chemical resistance to fuels, oils, solvents, and acids, along with a broad operating temperature range from -20°F to +400°F. Its low compression set ensures long-term sealing integrity even under sustained pressure, making it ideal for hydraulic systems, automotive components, and chemical processing equipment where material degradation is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating groove and O-ring surfaces are clean and free of debris. 2. Lubricate the O-ring and groove with a compatible lubricant as per application requirements. 3. Carefully install the O-ring into its designated groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Install the O-ring without excessive stretching to prevent premature failure and loss of sealing force. |
| Using incompatible lubricants or sealants. | Consult material compatibility charts and application-specific guidelines to select the correct lubricant. |
| Installing on a dirty or damaged groove. | Thoroughly clean and inspect the groove for any imperfections that could compromise the seal. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Automotive Fuel Systems, Chemical Processing Equipment, Hydraulic and Pneumatic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||