This high-performance Viton O-ring, crafted from Aluminum 6061, offers superior sealing in demanding industrial environments. Its robust construction ensures reliable performance under extreme temperatures and aggressive chemical exposure.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.182" |
| Outside Diameter | 5.622" |
| Cross Section | 0.273" |
A proven choice for industrial professionals, this Viton O-ring boasts an impressive 5.622" outside diameter, a precise 0.182" inside diameter, and a substantial 0.273" cross-section. Manufactured from high-grade Aluminum 6061, it exhibits exceptional resistance to high temperatures (up to 200°C/392°F) and a broad spectrum of chemicals, including fuels, oils, and many acids, making it ideal for applications where traditional elastomers fail. Its inherent durability and resilience ensure long-term sealing integrity in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the smaller diameter of the assembly, avoiding excessive force. 3. Gently guide the O-ring into its designated groove, ensuring it is seated evenly and without twists.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, crushing the O-ring. | Adhere to specified torque values for all fasteners to prevent over-compression. |
| Using incompatible lubricants that degrade Viton. | Utilize only manufacturer-approved or Viton-compatible lubricants. |
| Installing a twisted O-ring, leading to premature failure. | Visually inspect the O-ring for any twists before and during installation. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||