This high-performance Viton O-ring provides superior sealing in extreme environments. Its advanced polymer construction offers exceptional resistance to heat, chemicals, and aggressive fluids, ensuring reliable operation in critical industrial applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 5.505" |
| Outside Diameter | 5.105" |
| Cross Section | 0.239" |
Precision-manufactured to tight tolerances, this industrial O-ring features an Inside Diameter of 5.505", an Outside Diameter of 5.105", and a Cross Section of 0.239". Constructed from premium Viton (FKM), it exhibits outstanding resistance to a broad spectrum of chemicals, fuels, oils, and solvents, as well as excellent thermal stability up to 400°F (204°C). This combination of dimensional accuracy and material robustness makes it ideal for sealing in automotive, aerospace, chemical processing, and oil & gas industries where failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools that could nick or cut the seal. 3. Position the O-ring squarely within its designated groove, ensuring no twisting or pinching occurs during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants, which can degrade the Viton material. | Always refer to chemical compatibility charts and use lubricants specifically approved for Viton seals. |
| Overstretching or nicking the O-ring during installation. | Handle the O-ring with care, using appropriate tools and techniques to prevent damage. Ensure the groove is dimensionally correct for the O-ring size. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: High-temperature hydraulic systems, Chemical processing equipment, Fuel and oil handling systems, Aerospace fluid connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||