This industrial Viton O-ring, featuring a brass insert, is engineered for superior sealing performance in aggressive chemical environments. Its precise dimensions ensure a reliable, leak-proof fit for critical applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 5.011" |
| Outside Diameter | 4.990" |
| Cross Section | 0.149" |
Precision-manufactured to tight tolerances, this Viton O-ring boasts an Inside Diameter of 5.011 inches, an Outside Diameter of 4.990 inches, and a Cross Section of 0.149 inches. The fluorocarbon elastomer (Viton) provides exceptional resistance to a wide range of chemicals, oils, fuels, and high temperatures, ensuring longevity and operational integrity in demanding industrial settings. The integrated brass component enhances rigidity and provides specific conductivity or structural support where required, making it ideal for specialized fluid power or chemical processing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully install the O-ring into its designated groove, avoiding any pinching or stretching. 3. Apply a light coat of compatible lubricant if recommended for the specific application to facilitate assembly and ensure proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently stretch only as much as necessary to fit the groove, ensuring it seats properly without excessive tension. |
| Using incompatible lubricants or cleaning agents. | Always consult the material compatibility chart for Viton and the specific application to select appropriate lubricants and cleaning agents. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Hydraulic and Pneumatic Systems, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||