This industrial-grade Viton O-ring offers superior sealing capabilities in harsh environments. Its robust construction ensures long-term reliability and excellent resistance to chemicals and extreme temperatures.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 0.133" |
| Outside Diameter | 1.686" |
| Cross Section | 0.221" |
Engineered for reliability and performance, this Viton O-ring boasts an inside diameter of 0.133 inches, an outside diameter of 1.686 inches, and a precise 0.221-inch cross-section. Fabricated from Viton (FKM), a high-performance fluoroelastomer, it exhibits exceptional resistance to a broad spectrum of aggressive chemicals, fuels, oils, and extreme temperatures ranging from -20°F to +400°F (-29°C to +204°C). Its inherent low compression set ensures a persistent seal integrity under sustained pressure and thermal cycling, making it ideal for critical sealing applications where leakage is unacceptable and material degradation is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from debris or sharp edges. 2. Lightly lubricate the O-ring with a compatible lubricant if necessary for ease of installation. 3. Carefully place the O-ring into the groove, avoiding any twisting or stretching. Ensure it sits flush within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation, leading to premature failure. | Install the O-ring without excessive stretching. If resistance is met, double-check groove dimensions and consider a slight lubrication. |
| Using incompatible lubricants, which can degrade the Viton material. | Always use lubricants specifically rated for compatibility with Viton (FKM) elastomers. |
| Installing the O-ring into a dirty or damaged groove, compromising the seal. | Thoroughly clean and inspect the sealing groove for any imperfections before installation. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Automotive fuel systems, Chemical processing equipment, Aerospace hydraulic systems, High-temperature industrial pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||