This industrial Viton O-ring offers exceptional chemical resistance and thermal stability. Engineered for demanding sealing applications where standard elastomers fail, ensuring long-term reliability and performance.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.983" |
| Outside Diameter | 2.582" |
| Cross Section | 0.165" |
Precision-manufactured to tight tolerances, this Viton O-ring boasts an inside diameter of 4.983 inches, an outside diameter of 2.582 inches, and a cross-section of 0.165 inches. Fabricated from high-performance fluoroelastomer (FKM), commonly known as Viton, it exhibits superior resistance to a wide range of chemicals, fuels, oils, and extreme temperatures from -20°F to +400°F (-29°C to +204°C). Its robust material properties make it ideal for critical sealing in automotive, aerospace, chemical processing, and oil & gas industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or nicks in the O-ring. | Apply gentle pressure and use appropriate tooling to seat the O-ring without damage. |
| Incorrect O-ring size for the application, resulting in leaks or extrusion. | Verify the O-ring dimensions (ID, OD, CS) match the groove specifications precisely. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical processing equipment seals, Automotive fuel system components, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||