This industrial O-ring, constructed from premium Viton, delivers exceptional sealing performance in extreme environments. Its precise dimensions ensure a reliable fit for critical fluid and gas containment systems.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.836" |
| Outside Diameter | 10.919" |
| Cross Section | 0.163" |
Trusted by engineers across multiple sectors, this Viton O-ring (Polycarbonate material) boasts a precise Inside Diameter of 6.836 inches, an Outside Diameter of 10.919 inches, and a Cross Section of 0.163 inches. Viton, known for its excellent resistance to a broad spectrum of chemicals, oils, fuels, and high temperatures (up to 400°F/200°C), makes this seal ideal for aggressive media and demanding operational conditions found in automotive, aerospace, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating groove surfaces are clean and free of debris. 2. Lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to potential tearing or increased friction. | Always lubricate the O-ring with a compatible lubricant before installation. |
| Overstretching or twisting the O-ring during installation, causing premature failure. | Gently roll or place the O-ring into the groove without excessive elongation. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||