This industrial Viton O-ring, housed within a brass fitting, provides exceptional sealing performance. Its robust material and precise dimensions ensure reliable operation in challenging chemical and thermal environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.379" |
| Outside Diameter | 0.697" |
| Cross Section | 0.137" |
Precision-manufactured to tight tolerances, this industrial O-ring boasts an Inside Diameter of 9.379 inches, an Outside Diameter of 0.697 inches, and a Cross Section of 0.137 inches. The Viton (Fluorocarbon Elastomer) material offers outstanding resistance to aggressive chemicals, high temperatures (up to 400°F/204°C), and ozone, making it ideal for hydraulic systems, fuel lines, and chemical processing equipment. The brass housing ensures compatibility with specific fluid pathways and contributes to overall seal integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Carefully insert the O-ring into its designated groove, avoiding any stretching or twisting. 3. Apply a thin layer of compatible lubricant if necessary to facilitate assembly and prevent damage during mating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners around the O-ring groove. | Tighten fasteners according to specified torque values to prevent excessive compression and extrusion of the O-ring. |
| Using the wrong lubricant which can degrade Viton. | Consult material compatibility charts and use only lubricants specifically approved for Viton O-rings. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing, Hydraulic Systems, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||