This industrial O-ring, manufactured from premium Viton, is engineered for superior sealing in aggressive environments. Its precise dimensions and robust Aluminum 6061 construction ensure reliability and longevity in critical applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 4.695" |
| Outside Diameter | 9.546" |
| Cross Section | 0.243" |
Built to exacting engineering tolerances, this Viton O-ring features an Inside Diameter of 4.695 inches, an Outside Diameter of 9.546 inches, and a Cross Section of 0.243 inches. The Aluminum 6061 material provides excellent resistance to corrosion and moderate strength, making it suitable for applications requiring a combination of sealing integrity and structural support. Viton's inherent chemical resistance and high-temperature performance further enhance its suitability for demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris or damage. 2. Carefully install the O-ring into its designated groove, avoiding stretching or twisting. 3. Apply a light, compatible lubricant if necessary to facilitate installation and prevent premature wear.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently guide the O-ring into the groove, using a lubricant if needed, to prevent excessive tension. |
| Installing the O-ring on a damaged or dirty surface. | Thoroughly clean and inspect the groove and mating surfaces for any imperfections before installation. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Hydraulic systems requiring chemical resistance, Pneumatic actuators operating at elevated temperatures, Fluid handling equipment in chemical processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||