Engineered for exceptional performance in challenging industrial settings, this Viton O-ring provides superior sealing integrity. Its robust material composition ensures reliable operation under extreme conditions.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.551" |
| Outside Diameter | 5.596" |
| Cross Section | 0.235" |
Designed for demanding industrial environments, this Viton O-ring boasts an Inside Diameter of 4.551 inches and an Outside Diameter of 5.596 inches, with a precise Cross Section of 0.235 inches. Viton's inherent resistance to high temperatures, aggressive chemicals, fuels, and oils makes this seal suitable for critical applications in the automotive, aerospace, chemical processing, and oil and gas industries. Its low compression set ensures long-term sealing effectiveness, preventing leaks and maintaining system efficiency in harsh operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean and free of debris. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding any twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade the Viton material. | Always consult material compatibility charts and use lubricants specifically recommended for Viton seals. |
| Overstretching or twisting the O-ring during installation, leading to premature failure. | Install the O-ring gently and ensure it sits flush in the groove without excessive tension. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Fuel injection systems, Chemical pumps and valves, High-temperature sealing applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||