Engineered for extreme durability, this Viton O-ring, constructed from robust Aluminum 6061, ensures reliable sealing in high-pressure and high-temperature industrial applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.227" |
| Outside Diameter | 3.652" |
| Cross Section | 0.107" |
Manufactured under strict quality controls, this industrial O-ring boasts an Inside Diameter (ID) of 4.227 inches, an Outside Diameter (OD) of 3.652 inches, and a precise Cross Section (CS) of 0.107 inches. The Aluminum 6061 material offers excellent corrosion resistance and structural integrity, making it suitable for a wide range of chemical exposures and mechanical stresses. Its design ensures a tight seal, preventing leakage in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and absence of debris. 2. Carefully place the O-ring into the designated groove, ensuring it is not twisted or stretched beyond its intended fit. 3. Apply a thin, appropriate lubricant if recommended for the specific application to facilitate seating and prevent damage during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners that compress the O-ring excessively, leading to premature failure. | Adhere to specified torque values during assembly. Use a torque wrench for precise control. |
| Using incompatible cleaning agents that can degrade the O-ring material. | Consult the O-ring material compatibility chart and use only approved cleaning solutions. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic cylinders, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||