Engineered for extreme conditions, this industrial O-ring features advanced Viton material for exceptional chemical and heat resistance. Its precise dimensions ensure reliable, leak-free sealing in critical applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 3.785" |
| Outside Diameter | 1.202" |
| Cross Section | 0.254" |
Built to exacting engineering tolerances, this Viton O-ring is designed for superior performance in harsh industrial environments. With an inside diameter of 3.785 inches, an outside diameter of 1.202 inches, and a cross-section of 0.254 inches, it provides a robust seal against a wide range of aggressive chemicals, fuels, and high temperatures up to 450°F (232°C). The inherent resilience and low compression set of Viton ensure long-term sealing integrity, making it ideal for use in hydraulic systems, fuel lines, and chemical processing equipment where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, avoiding any twisting or stretching. 4. Verify proper seating and compression of the O-ring before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade Viton. | Always use a lubricant specifically rated for Viton compatibility. |
| Overtightening fasteners, which can crush the O-ring and compromise the seal. | Follow recommended torque specifications for all fasteners. |
| Installing a twisted or stretched O-ring. | Ensure the O-ring is installed straight and without undue tension. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Automotive Fuel Systems, Chemical Processing Equipment, Hydraulic and Pneumatic Systems, Aerospace Applications, Oil and Gas Industry.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||