This industrial Viton O-ring, crafted from robust Aluminum 6061, provides superior sealing performance. Engineered for critical applications, it ensures reliable containment under challenging conditions.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.658" |
| Outside Diameter | 4.214" |
| Cross Section | 0.071" |
A high-performance industrial component, this Viton O-ring is precision-manufactured with an Inside Diameter of 3.658 inches, an Outside Diameter of 4.214 inches, and a Cross Section of 0.071 inches. The inherent resilience and broad chemical resistance of Viton make it ideal for high-temperature and aggressive fluid environments. The Aluminum 6061 construction offers excellent strength and corrosion resistance, complementing the sealing capabilities in demanding industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding excessive stretching or twisting. 3. Verify proper seating before assembling the mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently ease the O-ring into the groove, using a lubricant if necessary, to prevent deformation and premature failure. |
| Installing onto a dirty or damaged groove. | Thoroughly inspect and clean the groove to ensure a proper seal and prevent damage to the O-ring. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||