Engineered for extreme environments, this Viton O-ring provides exceptional sealing integrity in harsh chemical and high-temperature conditions. Its robust construction ensures reliable performance where standard elastomers fail.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.537" |
| Outside Diameter | 9.928" |
| Cross Section | 0.170" |
Purpose-built for heavy-duty applications, this industrial O-ring boasts a precise Inside Diameter of 3.537 inches, an Outside Diameter of 9.928 inches, and a Cross Section of 0.170 inches. Constructed from high-grade Viton (a fluoropolymer elastomer), it exhibits outstanding resistance to a broad spectrum of chemicals, oils, fuels, and aggressive solvents, alongside excellent thermal stability up to 204°C (400°F). This makes it ideal for sealing systems in the automotive, aerospace, chemical processing, and oil & gas industries where extreme conditions necessitate superior material performance and long-term durability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating grooves are clean, dry, and free from burrs or damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant if recommended for the application. 3. Carefully insert the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or cuts. | Apply lubricant and gentle pressure, allowing the O-ring to seat naturally. |
| Incorrect O-ring size selection, resulting in leaks or premature failure. | Verify all critical dimensions (ID, OD, CS) against the groove specifications before ordering. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||