This industrial-grade Viton O-ring, featuring a brass gland interface, offers superior sealing performance in aggressive environments. Its precise dimensions ensure reliable containment of fluids and gases under extreme conditions.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.525" |
| Outside Diameter | 4.944" |
| Cross Section | 0.078" |
Manufactured under strict quality controls, this Viton O-ring is engineered for critical sealing applications. The material's inherent resistance to a broad spectrum of chemicals, including fuels, oils, and acids, coupled with its wide operating temperature range (-20°F to +400°F), makes it ideal for demanding industrial settings. The precise dimensions of 3.525" inside diameter, 4.944" outside diameter, and a 0.078" cross-section ensure a precise fit within its designated gland, preventing leaks and maintaining system integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and mating surfaces are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, avoiding any pinching or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants which can degrade Viton. | Always consult the compatibility chart for lubricants suitable for Viton and the specific media being sealed. |
| Over-stretching or twisting the O-ring during installation. | Install the O-ring without excessive stretching or twisting to maintain its seal integrity and prevent premature failure. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Automotive Fuel Systems, Chemical Processing Equipment, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||