This industrial-grade Viton O-ring is engineered for superior sealing performance in harsh environments. Its robust construction ensures reliable operation and extended service life in critical applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.478" |
| Outside Diameter | 4.407" |
| Cross Section | 0.120" |
Built to exacting engineering tolerances, this Viton O-ring boasts an Inside Diameter (ID) of 3.478 inches, an Outside Diameter (OD) of 4.407 inches, and a precise 0.120-inch cross-section. Manufactured from high-performance Viton (FKM), it offers exceptional resistance to a broad spectrum of chemicals, fuels, oils, and high temperatures up to 400°F (204°C). This makes it ideal for demanding applications in automotive, aerospace, chemical processing, and oil and gas industries where seal integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch and position the O-ring into the groove, avoiding excessive twisting or stretching. 3. Gently compress the O-ring to ensure it is seated uniformly within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently stretch the O-ring just enough to fit over the component, ensuring it doesn't exceed its elastic limit. |
| Using incompatible lubricants which can degrade Viton. | Always consult the material compatibility chart for lubricants suitable for Viton seals. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical Processing Equipment, Fuel Systems, Automotive Engine Seals, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||