This industrial O-ring, crafted from high-performance Viton and reinforced with Nylon, offers superior sealing in demanding environments. Its precise dimensions ensure a reliable, long-lasting seal against aggressive media and extreme temperatures.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.469" |
| Outside Diameter | 4.530" |
| Cross Section | 0.205" |
Engineered for reliability and performance, this industrial O-ring boasts a precisely machined 3.469" inside diameter, a 4.530" outside diameter, and a 0.205" cross-section. The Viton material provides exceptional resistance to a wide range of chemicals, fuels, oils, and high temperatures (up to 400°F/200°C), while the integrated Nylon reinforcement enhances its mechanical strength and extrusion resistance. This combination makes it ideal for critical sealing applications in hydraulic systems, automotive components, and chemical processing equipment where failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the gland and the O-ring to remove any debris or lubricant. 2. Carefully inspect the O-ring for any nicks, cuts, or damage. 3. Gently install the O-ring into the designated gland, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply even, moderate pressure and use appropriate lubrication if necessary for easier installation. |
| Incorrect O-ring size selection for the gland. | Always verify the O-ring's inside diameter, outside diameter, and cross-section against the gland's specifications before installation. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic Systems, Chemical Processing, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||