Engineered for superior chemical and heat resistance, this Viton O-ring provides reliable sealing in challenging industrial environments. Its robust construction ensures long-term performance and prevents leakage.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.420" |
| Outside Diameter | 1.514" |
| Cross Section | 0.089" |
Precision-manufactured to tight tolerances, this industrial O-ring boasts an inside diameter of 3.420 inches, an outside diameter of 1.514 inches, and a cross-sectional diameter of 0.089 inches. The Viton material offers exceptional resistance to a wide range of aggressive chemicals, oils, fuels, and high temperatures, making it suitable for demanding applications where standard elastomers would degrade. The Nylon reinforcement adds structural integrity and improved abrasion resistance. This combination ensures a durable and effective seal in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the shaft or into the groove, avoiding excessive force or sharp tooling. 3. Confirm the O-ring is properly seated and not twisted within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears in the O-ring. | Gently stretch the O-ring and use appropriate tools or lubrication if necessary to avoid damaging the sealing surface. |
| Installing a twisted or improperly seated O-ring, resulting in immediate leakage. | Visually inspect the O-ring to ensure it is flat and uniformly seated within the groove before assembling components. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical processing equipment, Automotive fuel systems, High-temperature hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||