Engineered for superior sealing performance, this industrial Viton O-ring features a robust brass construction. Its precise dimensions ensure reliable containment in high-pressure and chemically aggressive environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.417" |
| Outside Diameter | 7.575" |
| Cross Section | 0.205" |
Trusted by engineers across multiple sectors, this Viton O-ring (AS568-453 equivalent, though material is brass) offers exceptional chemical resistance to fuels, oils, acids, and solvents. Its high-temperature capability (up to 400°F / 204°C) makes it ideal for extreme operating conditions. The brass construction enhances its structural integrity and compatibility in specific fluid or gas handling systems where non-metallic seals may degrade. Dimensions: Inside Diameter: 3.417", Outside Diameter: 7.575", Cross Section: 0.205".
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly machined to the correct dimensions. 2. Lightly lubricate the O-ring and groove with a compatible lubricant to prevent tearing and facilitate installation. 3. Carefully install the O-ring into the groove, avoiding excessive stretching or twisting, ensuring it sits flush and evenly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring nicks or tears. | Employ gentle, consistent pressure and appropriate tooling. Lubrication can significantly ease installation and prevent damage. |
| Installing the O-ring into a contaminated or improperly sized groove. | Thoroughly clean the groove and verify its dimensions against the O-ring specifications before installation. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||