This industrial Viton O-ring provides superior sealing integrity in extreme environments. Engineered for demanding applications, its robust material ensures reliability and longevity under harsh chemical and thermal conditions.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.791" |
| Outside Diameter | 9.602" |
| Cross Section | 0.099" |
Manufactured under strict quality controls, this Viton O-ring boasts precise dimensions: an Inside Diameter of 3.791 inches, an Outside Diameter of 9.602 inches, and a Cross Section of 0.099 inches. Viton (Fluorocarbon elastomer) offers exceptional resistance to a wide range of chemicals, fuels, oils, and extreme temperatures (typically -20°F to +400°F / -29°C to +204°C). The carbon steel component, while not the primary sealing material, suggests potential applications where a rigid housing or specific mounting interface is required, or it may be part of a larger composite sealing assembly. This combination ensures robust performance in challenging industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the groove and the O-ring to remove any debris or contaminants. 2. Carefully lubricate the O-ring with a compatible lubricant (refer to material compatibility charts). 3. Gently install the O-ring into the designated groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lubricant that degrades Viton. | Consult a chemical compatibility chart for Viton and select a lubricant specifically approved for use with fluorocarbon elastomers. |
| Twisting the O-ring during installation, leading to premature failure. | Ensure the O-ring is installed smoothly and evenly into the groove, avoiding any twisting or stretching motions. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||