This high-performance Viton O-ring ensures superior sealing integrity in aggressive environments. Its robust construction resists extreme temperatures and a wide range of chemicals, providing reliable, long-term performance in critical industrial systems.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.205" |
| Outside Diameter | 8.667" |
| Cross Section | 0.118" |
A high-performance industrial component, this Viton O-ring boasts an Inside Diameter of 3.205 inches, an Outside Diameter of 8.667 inches, and a precise Cross Section of 0.118 inches. Fabricated from premium Viton (FKM), it offers exceptional resistance to high temperatures, aggressive chemicals, fuels, oils, and solvents. This makes it ideally suited for applications within the automotive, aerospace, chemical processing, and oil and gas industries where seal failure is not an option and requires robust performance under demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Gently seat the O-ring into the groove, ensuring it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Lubricate the O-ring and groove, and gently stretch the O-ring over the component, seating it carefully. |
| Installing the O-ring into a contaminated or damaged groove. | Thoroughly clean and inspect the sealing groove for any burrs or damage before installation. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Hydraulic Systems, Fuel Systems, Chemical Transfer Lines, High-Temperature Environments, Aerospace Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||