This industrial O-ring, constructed with high-performance Viton and a robust 304 stainless steel housing, offers superior sealing in demanding environments. Engineered for extreme temperatures and aggressive media, ensuring reliable, long-term operation.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.235" |
| Outside Diameter | 10.560" |
| Cross Section | 0.176" |
Purpose-built for heavy-duty applications, this Viton O-ring, encased in 304 stainless steel, features a precise Inside Diameter of 1.235 inches, an Outside Diameter of 10.560 inches, and a 0.176-inch cross-section. The Viton compound provides exceptional resistance to heat, chemicals, oils, and fuels, while the 304 stainless steel offers excellent corrosion resistance and structural integrity. This combination ensures reliable sealing in high-pressure, high-temperature, and chemically aggressive systems, making it suitable for petrochemical, automotive, and aerospace industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove and shaft surfaces are clean and free from debris. 2. Carefully position the O-ring within the designated groove, avoiding excessive stretching or twisting. 3. Apply a thin, compatible lubricant if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion. | Adhere to specified torque values during assembly to prevent over-compression. |
| Using incompatible lubricants or cleaning agents that degrade Viton. | Consult the material compatibility chart for Viton and select only approved lubricants and cleaning agents. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Hydraulic and pneumatic systems, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||