This industrial O-ring features a robust Viton elastomer encapsulated within a 316 stainless steel housing. Engineered for superior chemical resistance and thermal stability, it provides reliable sealing in extreme conditions.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.554" |
| Outside Diameter | 5.355" |
| Cross Section | 0.183" |
Specified by design engineers worldwide, this industrial O-ring boasts a precise inside diameter of 6.554 inches and an outside diameter of 5.355 inches, with a 0.183-inch cross-section. The advanced Viton material offers exceptional resistance to a broad spectrum of chemicals, oils, fuels, and solvents, while maintaining its sealing integrity across a wide temperature range. The 316 stainless steel housing enhances mechanical strength, corrosion resistance, and provides a secure, non-deformable interface. This combination makes it the preferred choice for critical sealing applications in aerospace, chemical processing, and automotive sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned. 2. Carefully position the O-ring into the groove, avoiding stretching or twisting. 3. Apply a thin, compatible lubricant if necessary to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or excessive force during installation | Use controlled, even pressure. If resistance is met, re-evaluate alignment and groove cleanliness. |
| Using incompatible lubricants or cleaning agents | Consult the material compatibility chart for Viton and 316 stainless steel to select appropriate substances. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical processing equipment, High-temperature fluid handling, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||