This industrial-grade Viton O-ring, encased in 316 stainless steel, offers superior chemical and temperature resistance. Engineered for demanding environments, it ensures robust and long-lasting seals in critical fluid and gas systems.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 5.941" |
| Outside Diameter | 10.390" |
| Cross Section | 0.121" |
Purpose-built for heavy-duty applications, this Viton O-ring boasts a nominal Inside Diameter of 5.941 inches, an Outside Diameter of 10.390 inches, and a precise Cross Section of 0.121 inches. The Viton elastomer provides exceptional resistance to a wide range of aggressive chemicals, fuels, oils, and high temperatures up to 400°F (204°C). The integrated 316 stainless steel housing enhances structural integrity, protects against abrasion, and maintains sealing force under significant pressure variations. Ideal for hydraulic systems, chemical processing, and automotive applications requiring dependable, leak-free performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, avoiding sharp tools that could damage the seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply consistent, moderate pressure and use appropriate tools for installation. |
| Installing the O-ring on a dirty or damaged surface. | Thoroughly clean and inspect mating surfaces before installation. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, Hydraulic and Pneumatic Systems, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||